ANPR for factory and warehouse gates: a practical guide
By Graeon.ai · Updated
ANPR (automatic number plate recognition) uses a camera at the gate to read each vehicle's number plate and match it against expected vehicles, gate passes and the vehicles already inside. At a factory or warehouse it can open a boom barrier for approved vehicles, record entry and exit times, and flag a truck that left without a matching exit or entered without a pass. Getting the camera angle, lighting and vehicle speed right matters more than the software.
What goes wrong at a manual gate
At most plant gates a guard writes the vehicle number, driver name and time in a register. At shift change or when several trucks arrive together, entries are rushed, numbers are written wrong and exits are missed. When a dispute comes up later, the register is hard to search and easy to question.
The bigger risk is material. A truck that enters for one purpose and leaves with more than its gate pass allows is hard to catch from a paper register alone.
What ANPR does at the gate
- Reads the number plate of each vehicle at entry and exit and stores the time and an image
- Checks the plate against expected vehicles: transporters, supplier trucks, staff vehicles
- Opens the boom barrier for approved vehicles and holds others for the guard
- Links each entry to a gate pass, purchase order or dispatch document
- Flags entry-exit mismatches: a vehicle with no exit, an exit with no entry, or a stay longer than expected
- Raises an alert for blacklisted vehicles
Gate passes and entry-exit mismatches
ANPR is most useful when it is connected to the gate pass. An inward truck with a purchase order is expected; the plate read confirms it arrived and when. An outward truck should match a dispatch document before the barrier opens. A returnable gate pass for material sent out for repair should be closed when the same vehicle brings it back.
The mismatch report is where the value is. Vehicles inside after hours, trucks that left without a closed gate pass, and the same plate appearing at two gates at once are each worth a phone call while the vehicle is still close by.
Camera setup: angle, lighting and speed
- Angle: mount the camera so it sees the plate as straight on as possible, not from a steep side or overhead view
- Distance: place it where the plate fills enough of the frame to be read, usually where vehicles slow down before the barrier
- Speed: use the barrier, a speed breaker or a stop line so vehicles pass slowly and one at a time
- Lighting: headlights at night and low sun in the morning cause glare; an infrared-capable camera and a shaded position help
- Both directions: use separate views for the front plate on entry and the rear plate on exit if one camera cannot see both
- Plate condition: dust, mud and damaged plates are common on trucks; a manual override for the guard is essential
Indian conditions to plan for
Plates vary: high-security registration plates, older plates, hand-painted transport plates, two-line plates on trucks and commercial yellow plates. Test on the vehicles that actually come to your gate, not on a sample set. Dust on the road and monsoon rain also affect reads, so review missed reads by season.
Keep the guard in the loop. ANPR should make the guard faster and more accurate, not leave the gate unmanned. Every manual override should be recorded with a reason.
How Graeon does it
Graeon Industrial Vision AI includes ANPR-camera-based boom barriers, vehicle gate passes and visitor management on existing CCTV, and flags entry-exit mismatches and gate pass fraud. Graeon ERP holds the digital gate passes for visitors, vehicles and material movement, so a plate read becomes a gate entry against the pass rather than a line in a paper register.
Alerts reach the Netra mobile app, email and SMS. Graeon ERP has ready connectors for Tally and Oracle; other systems are connected through the API as a project.